Three Indian Block Printed Leaves

I mentioned recently that I’d attended another Adult Learning course covering Indian Block Printing & Stitching, but hadn’t shared much of that here just yet. Not wanting to tease you I thought I should share some of that now that I’ve mentioned it, though there’s much more to come on this craft as this is the one I’m finding the most addictive so far. There’s so many possibilities, especially if I combine this with my newly found pouch-making skills!

But let’s not get ahead of ourselves!

I’ll share more about the course and its format in a future post, here I want to focus on a completed piece - or almost completed piece…

How it started…

It started quite simply, using old bedding as my background material. This was from the box-pleated ‘frill’ of an old valance sheet which I cut off and edged using my overlocker. I ironed it too - there was a lot of it, though it was much easier to iron now that it wasn’t attached to the central section which goes under the mattress! We’d not used the valance sheet for many years as not only was it hard to iron, it was also tricky to manoeuvre under the mattress and well, life’s too short for all that.

I printed the designs onto the fabric using fabric and Indian blocks at the adult learning class - and as you can see used the same block to create the design of three leaves. I also experimented with using two colour fabric paints on the middle block, adding an almost fluorescent yellow to the shimmering green, which I used on the outer leaves.

Three leaves block printed onto a piece of old bedding - two with the point down and a third between them with the point up

I liked this as a design and the resulting print, though the leaves kept reminding me of onions for some reason, and I’ve no idea why. Having rediscovered the joys of chain stitch as part of this course I was keen to continue that, and decided to outline the leaves and then fill in the blanks, but keeping the central design different.

I wanted to keep the green and green/yellow outline, and I wanted the central design to be prominent. Looking through my threads I opted for browns through to blush pink for the outer leaves and for oranges through to yellow for the central motif - the colours just seemed right.

All three motifs outlined and filled with chain stitches in neutral colours for the two outside leaves and warm oranges and yellows for the middle motif

Stitching was surprisingly addictive, and quick. It seems I didn’t stop and take many photos of the in-between stages, but if you look at the middle leaf that’s edged with a lime green thread, rather than the darker green used on the outer two.

I also made it up as I went along, mixing and matching strands of my threads to help ease the colour progression, and I’m really pleased with how this turned out.

So then I decided to add some beads.

Just tiny little ones.

In some of the gaps.

The same three leaves, now with added beads in some of the gaps - the beads follow the colours of the threads

Again allowing my creativity to lead.

It’s quite different to how it started isn’t it?

The embroidery is done, but this piece isn’t yet fully completed as I want to incorporate it into a pouch somehow - I’m just not sure how, just yet but I’m sure I’ll know in the not too distant future. For now I’m enjoying this unique piece which I’ve created without knowing where I’d end up.

PostCommentLove

A pincushion and two pouches for starters

My journey with the Adult Learning classes here in Newark continues, I’m currently attending the Machine Sewing for Beginners class for bags, and while I’m not a beginner with my sewing machine, I am new to bags. I also want to up my skill levels on putting in zips and buttonholes and as both of these are covered in the 6 week course, and knowing how good the courses I’ve been on so far have been, I signed myself up.

This is actually my third course - I started with the Gelli Plate Printing class and then quickly followed that with an Indian Block Printing and Stitch course, which was amazing and I’m hooked on printing onto fabric. I’ve not shared much of that yet, and none here though you may have seen some on my Instagram feed and stories, but I have so much to share from that one, so keep an eye out for that.

The bag making class is small - there’s just five of us and the tutor, and the skill level is mixed which is something I anticipated when I signed up. However there is still much to learn, especially as I’m using a machine provided by the course which is a newer model than mine and has a top loading bobbin which I’d not seen before, and it’s also nice to spend time with other people doing the same thing.

It’s also been hands-on too, some theory obviously, but not overly so. In fact the first week we all left having made a pincushion, so that was nice. As I wasn’t sure what it’d be like or what we would start with, I decided to take along fabric that wasn’t at the top of my favourites list, and that which I’d probably not rush to use.

And so that first week I made a Christmas pincushion, like you do!

A light grey square fabric pincushion, the material has snowflakes arrows and reindeers in red, green and brown line drawings - and there's a large red button at the centre

I’d misjudged the seam allowance on the new-to-me machine and only realised once I’d turned the pincushion the right way through, which meant that hand sewing the closure was more tricky than it needed to be and therefore it wasn’t as neat as it could have been.

That annoyed me in a minor way, but later on I realised that I could pimp up my pin cushion and make it even more Christmassy by adding a simple red and white twine around the edge. The ‘twine’ I used is actually paper (but quite solid) which I’d saved from Christmas presents last year!

the same pincushion as the previous photo, now with orange and green pins pressed into the top and a red and white trimming around the seamed edge

There was nothing wrong with it before, but I’m much happier with it now!

Next up it was a simple pouch, and for this we needed two pieces of material - outer material and lining - approximately the size of an A4 sheet of paper. While I had my B team material to choose from, I also had something else in mind. It was a bit smaller than needed but as this sort of pouch can be flexible on size I decided to go for it, and left with this completed pouch.

A cream pouch with black and white printed detail and a purple popper

I’ve not made anything like this for a long time, and this was easier than I remembered. As the tutor said she’s a big fan of straight line sewing, and this is mostly that - and the purple popper sets it off nicely too, and complements the purple batik lining (which was firmly in my B team fabric list).

There was one part that I wasn’t entirely happy with (again) - if you look in the bottom left hand corner you can see the sewing is a bit wild where I started off and revved the machine a little too much and off it went! It was a shame it was on the plain background of the material, had it been on the other side in the pattern I don’t think I’d have noticed it quite so much.

But I wasn’t undoing it, this was a practice pouch and it still worked perfectly well.

Then I realised I had some ribbon that was very similar to the background colour, so I dug that out and added an embellishment in that corner, front and back.

The opened pouch showing purple batik lining, and the addition of a toning trim in the bottom left hand corner

Now it looks as if it was always meant to be there, and I’m much, much happier.

I also got to start another similar but different pouch - one that’s ideal for sunglasses, and as I didn’t have sunglasses case it was perfect for me. I choose A team material for the outside, and again B team material for the lining. There’s nothing wrong with the lining material, but I think a lot of what I’m calling my B team materials just look better in small doses!

The same pouch as the photo above, this time with the flap open to show the lining - navy with a green/blue and white/brown checked design

The outer material reminds me of Portuguese tiles, and the lining of a man’s shirt from the 1970s!

And for a change this one hasn’t been pimped up, I finished it in the third week of the course just as the sun decided to make an appearance (at last!) - so I couldn’t have timed it better!

It's a rainbow wrap!

It’s been a while since I shared my rainbow squares on here, 2020 in fact, so quite a while! But I recently rediscovered them, and thought that it probably wouldn’t take me too much effort to finish this project off, and if I got my skates on I could take it on my travels next month.

After this post I shared a layout post on Instagram, convinced that I’d nailed the layout and I’d ‘pinned’ it together with stitch markers to save me having to remember what I’d decided on, which was helpful.

THE ORIGINAL LAYOUT

But the more I looked at this layout, the less convinced I was. And then I realised that with a simple switch I could have a different look - and well, there was no harm in trying was there, if I disliked it I could switch it back again as it’s not like I had attached them permanently.

And so I took the yellow and green ‘ends’ and switched them into the middle:

switching colours - now blues and purples at the top, to greens, yellows and ending on pinks

For me this layout just popped, and just this small change made me feel instantly better about the whole thing - and more importantly, it made me want to finish it. Isn’t colour a strange thing?

Anyway to finish it I needed to permanently attach the squares to each other, I’d initially thought I’d do that sewing them together rather than by joining as per the vintage pattern and crocheting. But now that I’d come to actually join them, the sewing together option was a non-starter; I didn’t have leftover wool in each colour and I’d lose some of the laciness, so it was back to the quite sparse instructions in the vintage pattern, and working out a new plan.

That new plan involved a new purchase

I thought about a white or a silver, but neither grabbed me when I tried those colours alongside my rainbow squares, so I checked out my usual online wool shops and got lucky. This ‘skyfall’ colourway from The Wool Kitchen is a perfect match to the original wool which came as part of the mini-skein club by Vicki Brown Designs.

The new grey & multi colour flecked addition laid in the middle of the yellow and green squares

With a bit more head scratching, lots more ‘pinned’ stitch markers and a bit of trial and error I worked it out, and quite quickly the short lengths and then the longer lengths were attached to each other.

My rainbow squares attached to each other with a light grey chain stitch

ATTACHED!

A CLOSER LOOK AT THE JOIN

It already looks so much better than I could have imagined - and there’s a real chance I may just finish it soon too. I just need to add a row of double crochet around the edge and finish with a row of picot stitches - the pattern for this is just as sparse, but I’m confident it’s within my grasp.